To use a heating rod for goldfish, first place the heating rod completely in the water, fix it with a suction cup, then turn on the power and adjust the parameters. The temperature of the heating rod will be very high after it is energized, so do not energize it directly in the atmosphere. When adjusting parameters, it is also necessary to pay attention to the fact that the power should match the total water volume and heating requirements.

How to use the heating rod

Place the heating rod completely in the water. It can be placed vertically, horizontally or diagonally. Use a suction cup to fix it, and then adjust the control box. parameters. There are four principles for using heating rods.

First, the power and total water volume need to be coordinated. Second, power and heating requirements must be consistent. Third, the electric heating part must be completely hydrated. Fourth, there are no heating rods with metal surfaces that can be used in seawater tanks.

The temperature of the heating rod is very high after it is powered on, so do not energize it in the air, otherwise it will easily burn out or even burst. Even after the power is turned off, it cannot be taken out of the water immediately. Sometimes the indicator light of the heating rod does not work normally, so whether it can be turned on should be based on whether the water temperature rises.

                    </p>

                </p>